To use Unblockr, you have to change the DNS address of your computer or mobile/multimedia device.
Be sure to make a note of the current server addresses or settings. Keep these numbers for backup purposes in case you need to revert to them.
If you have just gotten your TV recently, it should be running on WebOS firmware. If so, the steps to change this on your TV should be as below:
- Press the settings button on the remote to access the All Settings page.
- Click on Network.
- Select Wifi Connections if you are using Wi-Fi to connect or Wired Connection (Ethernet) if you are using cable.
- On Wi-Fi, select Advanced Wi-Fi Settings or Advanced Wired Settings if you are on cable.
- Uncheck Set Automatically.
- Select the DNS Server field.
- Type in the DNS numbers from the list below depending on which region you want
- Click Connect to confirm the entry.
If you are on an older version of LG Smart TV and the above steps doesn't apply to you, please try the ones below:
- Press the Settings button on the remote.
- Navigate to Network and select Network Connection.
- Go to Network Settings.
- Press Start Connection.
- Select your wireless network, if you're using Wifi, and select "Other Network List".
- Scroll down and select the "Set Expert" button.
- Scroll down to the DNS Mode box.
- Select the Manual Tab
- Type in the DNS numbers from the list below depending on which region you want
- Confirm the entry.
- Your TV will now test the connection.
- Press Complete to complete the setup.
American DNS Servers:
Primary : 138.68.29.183
Secondary: 159.203.58.150
UK DNS Servers:
Primary: 178.62.57.141
Secondary: 139.162.231.18
CANADA DNS Servers:
Primary: 159.203.58.150
Secondary: 138.68.29.183
Germany DNS1 = 68.183.215.9
Germany DNS2 = 161.35.23.59
For further support please access our Unblockr Facebook community as you may find lots of ready made discussions with solutions are already posted
https://www.facebook.com/groups/unblockr/
Thanks